SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch (2 Way), Works with Alexa, SmartThings Hub, Google Home&SONOFF ZBBridge-P, ZigBee Hub Required, No Neutral Required


From the brand

SONOFF Smart HomeSONOFF Smart Home

SONOFF

Foster innovation to make life simpler and smarter.

SONOFF Smart HomeSONOFF Smart Home

SONOFF specializes in the development and production of smart home hardware and products.

It locates in Shenzhen, which is the largest electronics market in China and the most integrated electronics supply chain in the world. Thanks to our great capacity for innovation, SONOFF is able to offer high quality innovative products at an affordable cost.

SONOFF zigbee Smart Switch

SONOFF Zigbee sensor series

SONOFF Zigbee Smart HomeSONOFF Zigbee Smart Home

Zigbee 3.0 Standard Protocol

Compatible with more Zigbee hubs developed using standard protocols.

SONOFF Zibee Smart HomeSONOFF Zibee Smart Home

Voice command

Tell your voice assistant what you need, make life smarter.

SONOFF Smart HomeSONOFF Smart Home

Compact Design: This smart switch no neutral required can be easily fit in the smallest 120 type wall switch box. The zigbee smart light switch is suitable for external rocker switches and self-reset switches
Zigbee 3.0 Protocol: As a Zigbee 3.0 switch, ZBMINIL2 smart switch can combine with Zigbee hubs to form a home LAN. Unlike Wi-Fi switches, Zigbee switches continue to execute pre-set smart scenes even if the internet connection is lost.(Note: The ZBMINIL2 is a Zigbee end device, cannot act as a repeater to extend signal range.)
Remote Control with eWeLink App: Pair the smart switch with the Zigbee hub to the eWeLink app for remote control of your appliances
Voice Control: The Zigbee interruptor inteligente is compatible with Alexa, Google Home, Alice, and SmartThings, allowing for convenient voice-activated operation
Timers & Scenes: Via Ewelink app, you can set countdowns, timers, and loop timers to create a customized living experience. Configure smart scenes to trigger connected devices, making life easier

$18.99

Compare


Price: $18.99
(as of Jan 09, 2025 16:26:28 UTC – Details)


From the brand

SONOFF Smart HomeSONOFF Smart Home

SONOFF

Foster innovation to make life simpler and smarter.

SONOFF Smart HomeSONOFF Smart Home

SONOFF specializes in the development and production of smart home hardware and products.

It locates in Shenzhen, which is the largest electronics market in China and the most integrated electronics supply chain in the world. Thanks to our great capacity for innovation, SONOFF is able to offer high quality innovative products at an affordable cost.

SONOFF zigbee Smart Switch

SONOFF Zigbee sensor series

SONOFF Zigbee Smart HomeSONOFF Zigbee Smart Home

Zigbee 3.0 Standard Protocol

Compatible with more Zigbee hubs developed using standard protocols.

SONOFF Zibee Smart HomeSONOFF Zibee Smart Home

Voice command

Tell your voice assistant what you need, make life smarter.

SONOFF Smart HomeSONOFF Smart Home

Compact Design: This smart switch no neutral required can be easily fit in the smallest 120 type wall switch box. The zigbee smart light switch is suitable for external rocker switches and self-reset switches
Zigbee 3.0 Protocol: As a Zigbee 3.0 switch, ZBMINIL2 smart switch can combine with Zigbee hubs to form a home LAN. Unlike Wi-Fi switches, Zigbee switches continue to execute pre-set smart scenes even if the internet connection is lost.(Note: The ZBMINIL2 is a Zigbee end device, cannot act as a repeater to extend signal range.)
Remote Control with eWeLink App: Pair the smart switch with the Zigbee hub to the eWeLink app for remote control of your appliances
Voice Control: The Zigbee interruptor inteligente is compatible with Alexa, Google Home, Alice, and SmartThings, allowing for convenient voice-activated operation
Timers & Scenes: Via Ewelink app, you can set countdowns, timers, and loop timers to create a customized living experience. Configure smart scenes to trigger connected devices, making life easier

Customers say

Customers find the electronic switch works well and has reliable connectivity. They appreciate its simple installation and quick reconnects after power loss. However, some customers have reported issues with the light source, mentioning that fluorescent lights are an inductive load that can fry the device.

AI-generated from the text of customer reviews

Based on 12 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. Finn

    Works great
    I live in an older house and don’t have neutral wire in my switch junction boxes, so I grabbed this to add smart functionality to my dining room light, which has direct wired LED tubes. Note: this is not suitable for a tube fixture that has not been designed or retrofitted for direct wire LEDs, as fluorescent lights are an inductive load and can fry the device when you shut them off. I used a short piece of lamp cord as a jumper between the switch connections and the device. With a little work, I was able to fit it into the shallow 2 gang box that switch is located in. Device paired immediately with ZHA on Home Assistant and has worked perfectly since.

    Finn

  2. K. Lacey

    SmartThings compatible
    I bought this little box without knowing for certain if it would do what I wanted it to do. I put some smart wafer lights in my kitchen ceiling, but they do not respond to my SmartThings commands if the double-pole light switch they are connected to is switched off. I was hoping the installation of this switch would remotely turn the switch on and enable the lights to still work.When I first got this thing, I chickened out of installing it in this switch because I wasn’t 100% confident I understood the wiring diagram, and I wasn’t even sure it would do what I wanted it to do even if it was installed properly. So it stayed unused for about 6 weeks until I got the bright idea to use it on a single-pole switch that operated a track light over the kitchen sink that predated my foray into SmartThings connectivity. I still battled my insecurities about the wiring diagram but proceeded anyway, connecting the wires as I best understood it.When I powered the circuit back on, I could tell I had done it right because every time I touched the test button on the Sonoff module, the lights went from on to off or vice versa. But after downloading the recommended app (eWeLink) on my smartphone, I could not get the module to be recognized. With SmartThings, there is compatibility with other apps, so once you get the native app to recognize the device, you can import it into SmartThings. Anyway, I tried a number of times to initialize the module so the eWeLink app could connect, but never succeeded. Finally out of desperation, I opened up my SmartThings app and initiated the Add Device command, and it recognized it almost immediately. So now I can control these track lights through SmartThings. And the wild thing is that the single-pole wall switch now behaves like a double-pole switch. If you want to turn the lights on by activating the wall switch, you simply flick the switch up if it’s down, or down if it’s up. The “on” and “off” label embossed on the toggle is no longer relevant.

    K. Lacey

  3. Leo

    Need better quality control
    The screw on the S1 was stripped and couldn’t be tightened. They should have better quality control or better parts.

    Leo

  4. R. D. Williams

    Works well
    It was easier to hook up than I expected. The old regular dub switch actuates the device instantly, which is nice, I was expecting a little lag. No problems with loosing power, it reconnects very quickly and reliably. Recommended.

    R. D. Williams

  5. Brenton

    Most fail quickly
    I got 8 of these and within a year I’ve replaced all but 1 of them and the one that is left has so many intermittent issues. Save yourself the time by avoiding these in the first place and find a different solution like a Shelly.

    Brenton

  6. Charlie

    Sonoff works with eWeLink
    Very easy and works great.bNow they even have a smaller one, that really does fit in any box.

    Charlie

  7. Psychgirl

    Fantastic!
    For some reason, all the switches in my house are dark brown and have no neutral. Been looking to Alexify my light switches for a while now but could not find either brown switches or no-neutral alternatives until I found these.Installation in the wall was super easy and I could potentially easily fit one of these inside the box for each of the three switches in there.Pairing instructions aren’t very clear and if you never used zigbee or z-wave items before, you might need some extra help. Apparently, I didn’t need to download an app as my SmartThings hub easily found it and connected it to Alexa without problems.I wasn’t sure how well it would work so I bought only 1 to test. However, after installation of this one, I bought 8 more! 🙂 I might buy more soon.

    Psychgirl

  8. Carlos Fernando da Silva

    Deve funcionar bem, o meu eu fiz alguma m……da que deu curto e queimou…

    Carlos Fernando da Silva

  9. Joaquín O.

    No he logrado conectarlo a red wifi. Ya lo intente con varios dispositivos y no lo encuentra, no lo escanea.

    Joaquín O.

  10. Manuel

    Me ha gustado lo sencillo que es instalarlo y configurarlo. Y poco más que decir, funciona bien, lo tengo con Home Assistant y de este a Apple HomeKit (Casa) y perfectamente.

    Manuel

  11. Chris de Vries

    Het product is eenvoudig te installeren en je kunt gewoon je bestaande schakelmateriaal blijven gebruiken. Het werkt ook prima met hotelschakelingen zonder dat je nieuwe draden hoeft te trekken.

    Chris de Vries

  12. abdulrhman

    مو راضي يشبك على اي برنامج او جهاز حاولت بكل الطرق

    abdulrhman