Litcessory Flexible Corner Connector/Extension Cable for Philips Hue Lightstrip Plus (2in, 4 Pack, White – Micro 6-PIN V4)

Litcessory Flexible Corner Connector/Extension Cable for Philips Hue Lightstrip Plus (2in, 4 Pack, White – Micro 6-PIN V4)

Compare

Product Description

Customize philips hue lightstrips with easy to assemble connectors from litcessoryCustomize philips hue lightstrips with easy to assemble connectors from litcessory

Flexible Corner Connector

Philips Hue is great, but it only allows for a single, continuous lightstrip run. Litcessory products allow for several! This flexible corner connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect two lightstrips with a sharp angle and is more versatile than a hard 90-degree connector, which requires precise alignment of your two lightstrips. This flexible corner connector is 2 inches/50 mm long and can be folded over to give you a 1 inch/25 mm margin of error when installing your lightstrips.

NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory “Controller to 6-Pin Adapter” to do so.

If you want to connect to a cut lightstrip, you must use one of our 6-Pin to Cut-End products. Please see our product line chart below for more info.

This product is great for…

Joining two light strips with a sharp cornerActing as a 2-inch/50 mm extension for breaks between light stripsFlexing to adapt to installations where installation is difficult

Important things to keep in mind…

Male ends are removable, converting them to female.Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined).Cable is UL Listed.Made for Indoor Dry Locations Only.

Top Uses of a Litcessory Flexible Corner Connector

flexible corner connector for philips hue lightstrip plus examplesflexible corner connector for philips hue lightstrip plus examples

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

Is the total recommended length of the lightstrip (10 meters/33 feet) affected by the extension cable and/or an ethernet cable? Is it 10 meters/33 feet plus the length of the ethernet cable?

We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this.

litcessory connection typeslitcessory connection types

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.1 out of 5 stars

221

4.4 out of 5 stars

772

4.4 out of 5 stars

1,689

4.2 out of 5 stars

426

3.9 out of 5 stars

14

4.0 out of 5 stars

183

Price

$18.19$18.19 $18.19$18.19 $28.39$28.39 $19.29$19.29
— $19.29$19.29

Compatible with Philips Hue Lightstrip Plus

✓

✓

✓

✓

✓

✓

Can be placed between the controller and the first lightstrip
Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter
✓
– –

Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined)

✓

✓

✓

✓

✓
–

Cable is UL Listed

✓

✓

✓

✓
– –

Indoor/Outdoor
Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only

Connection Type
6-Pin to 6-Pin 6-Pin to 6-Pin 6-Pin to 6-Pin Controller to 6-Pin – –

6-Pin Connector Removable?

✓

✓

✓

✓
– –

Attention — Select the Correct Version: Philips makes two (2) versions of their lightstrips (Standard 6-Pin V3 and Micro 6-Pin V4). The Micro 6-Pin V4 has a smaller pin connection and is bluetooth compatible, while the Standard 6-Pin V3 features larger pins and is not bluetooth compatible. Please see the image with both connectors to determine the correct version you have before purchasing. Note: This product is Not compatible with Hue Play and Hue Gradient lightstrips.
Endless Design — create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room — the possibilities are endless!
Easy Installation — easy to use! Our cables are flat & flexible and all pin connectors are removable.
Tech Specs — designed for the Philips Hue Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only.
Required — if you want to connect this product directly to the Philips Lightstrip Controller, you must use our Controller to 6-Pin Adapter.
Litcessory’s 2 Year Warranty — We know you’ll love this product, but if you have any issues at all, just send us a message and we’ll be happy to assist!

$18.19

Compare


Price: $18.19
(as of Jan 07, 2025 15:08:44 UTC – Details)


Product Description

Customize philips hue lightstrips with easy to assemble connectors from litcessoryCustomize philips hue lightstrips with easy to assemble connectors from litcessory

Flexible Corner Connector

Philips Hue is great, but it only allows for a single, continuous lightstrip run. Litcessory products allow for several! This flexible corner connector, specifically designed for the Philips Hue Lightstrip system, enables you to connect two lightstrips with a sharp angle and is more versatile than a hard 90-degree connector, which requires precise alignment of your two lightstrips. This flexible corner connector is 2 inches/50 mm long and can be folded over to give you a 1 inch/25 mm margin of error when installing your lightstrips.

NOTE: If you want to connect this product directly to the Philips Lightstrip Plus Controller, you MUST use the Litcessory “Controller to 6-Pin Adapter” to do so.

If you want to connect to a cut lightstrip, you must use one of our 6-Pin to Cut-End products. Please see our product line chart below for more info.

This product is great for…

Joining two light strips with a sharp cornerActing as a 2-inch/50 mm extension for breaks between light stripsFlexing to adapt to installations where installation is difficult

Important things to keep in mind…

Male ends are removable, converting them to female.Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined).Cable is UL Listed.Made for Indoor Dry Locations Only.

Top Uses of a Litcessory Flexible Corner Connector

flexible corner connector for philips hue lightstrip plus examplesflexible corner connector for philips hue lightstrip plus examples

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

Is the total recommended length of the lightstrip (10 meters/33 feet) affected by the extension cable and/or an ethernet cable? Is it 10 meters/33 feet plus the length of the ethernet cable?

We recommend keeping your total lightstrip run under 10 meters/33 feet. This includes the total length of your lightstrips and any Litcessory products and ethernet cables. Some customers have reported success going over this limit, however we have not tested this.

litcessory connection typeslitcessory connection types

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.1 out of 5 stars

221

4.4 out of 5 stars

772

4.4 out of 5 stars

1,689

4.2 out of 5 stars

426

3.9 out of 5 stars

14

4.0 out of 5 stars

183

Price

$18.19$18.19 $18.19$18.19 $28.39$28.39 $19.29$19.29
— $19.29$19.29

Compatible with Philips Hue Lightstrip Plus

✓

✓

✓

✓

✓

✓

Can be placed between the controller and the first lightstrip
Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter
✓
– –

Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined)

✓

✓

✓

✓

✓
–

Cable is UL Listed

✓

✓

✓

✓
– –

Indoor/Outdoor
Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only

Connection Type
6-Pin to 6-Pin 6-Pin to 6-Pin 6-Pin to 6-Pin Controller to 6-Pin – –

6-Pin Connector Removable?

✓

✓

✓

✓
– –

Attention — Select the Correct Version: Philips makes two (2) versions of their lightstrips (Standard 6-Pin V3 and Micro 6-Pin V4). The Micro 6-Pin V4 has a smaller pin connection and is bluetooth compatible, while the Standard 6-Pin V3 features larger pins and is not bluetooth compatible. Please see the image with both connectors to determine the correct version you have before purchasing. Note: This product is Not compatible with Hue Play and Hue Gradient lightstrips.
Endless Design — create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room — the possibilities are endless!
Easy Installation — easy to use! Our cables are flat & flexible and all pin connectors are removable.
Tech Specs — designed for the Philips Hue Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only.
Required — if you want to connect this product directly to the Philips Lightstrip Controller, you must use our Controller to 6-Pin Adapter.
Litcessory’s 2 Year Warranty — We know you’ll love this product, but if you have any issues at all, just send us a message and we’ll be happy to assist!

Category: Tag:

Based on 10 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. Chris –

    Perfect if you’re trying to mount light strips to a pegboard.
    The Litcessory Flexible Corner Connector/Extension Cable is the perfect accessory for the Philips Hue Lightstrip v4. I needed to mount them behind some IKEA Skadis pegboards and these did the trick.

    Chris –

  2. it’s a good note taker –

    Essential
    Love that Litcessory offers accessories for Philips Hue. The stuff fits as advertised and is very helpful. No issues so far but only had it for a couple of weeks

    it’s a good note taker –

  3. Kenneth Morris –

    none
    Appears to be a good product at this time.

    Kenneth Morris –

  4. psylvester117 –

    Like all other Litcessory products, good luck!
    Was so excited to try and create a custom lighting situation in the kitchen. Used these with several other V4 litcessory pieces. They fall out easily and will cause your lights to short out, ruining the power supply. Gotta electrical tape them together and hope for the best. Prongs get bent easily and yet ironically the wires themselves are not as bendable as you would hope them to be!

    psylvester117 –

  5. Michael Serrano –

    It’s worth it
    Ever since my family and I have been COVID bound been making some new adjustment to the home and obviously to my home theater (movie junkies). Was looking to attach some hue Phillips string lights and needed this extension. Works great but if behind TV pray it doesn’t come loose it’s hard to reattach. Secret is attach this to the extension they give u to unit world of a difference

    Michael Serrano –

  6. Dave –

    Heb deze gekocht voor de philips Hue led strip. goed werkende hoek connectoren

    Dave –

  7. Norbert Döring –

    Philips Light-Sprips ist ein wundervolles Produckt. Ich verwende es für eine Ergänzung zu meiner Lichtherapie.

    Norbert Döring –

  8. AHavard –

    Pratique mais cher et pas esthétique

    AHavard –

  9. stumc –

    Very flexible connectors which is what I needed. Although the actual connection is quite slack maybe the pins need to be slightly thicker?But overall did the job for me.

    stumc –

  10. Antonio –

    Accessori che costano un po’ ma che sono dei veri e propri “salvavita” per chi ha necessità di posizionare al meglio le strip led Philips Hue. Funzionalità perfetta!

    Antonio –

Related products