Lutron Caseta Smart Lighting Pico Remote, For Wireless Light Bulbs and Lamps, Works w/ Alexa, Apple Homekit, Google Home (Hub Required), 3-Way, Batteries Included, PJ2-3BRL-WH-L01R, White

Saves Electrical Wiring Costs and Labor
Recently remodeled master bedroom, and original wiring plan involved much more extensive and expensive work to install 3-way switches at bedroom entrance and above each night stand, to control overhead and reading lights, as well as lamps on a credenza.These worked perfectly. Pico remotes can be easily programmed to control individual or multiple lights/plugs at the same time. Multiple remotes also can control the same lights/plugs such as having a set of remotes for each side of the bed. For the two bedside reading lights I ordered Pico remotes with an illuminated center buttons.The dimmer also works perfectly with my Philips GU-10 LED bulbs in the ceiling’s recessed fixtures — these bulbs get warmer as you dim them. I also recommend buying the weighted bases to hold the remotes — in my configuration, I have three remotes on each bedside, which fit neatly together in these angled bases – they come in single, double and triple models. These stands also protects the remotes from getting wet if you knock over a glass of water during the night, and keeps our cat from batting them off the nightstand.My only issue was that I accidentally programmed one of the remotes to turn on and off more than one lamp, and Lutron’s customer forum is a bit kludgy to navigate. Some of the suggestions didn’t work for my Caseta / Pico remote combo, but another customer reported that he spoke with a live Lutron agent and these steps worked:1) On the lower off button on the Pico remote, quickly tap 4 times and hold down the button on the 5th press until the solid green light comes on. Then again quickly tap the lower button 4 times.2) The above worked perfectly to reset the Pico remote, and I was easily able to reprogram it by holding down the off button on the wall switch until it flashes, and then holding down the off button on the Pico remote until it flashes and synchs with the switch.

Very handy
I’ve got several of these spread around my man cave. Easy to program and install. They let me control and dim the ceiling lights from my recliner. And are a good alternative to having to install 3 way switches and wiring.

Flexible: Allows Use With or Without a Home Automation Hub
I am using this in conjunction with a Lutron Caseta wall dimmer switch and a Wink hub. The downside to these products is that they have a proprietary wireless system (not Z-wave or Zigbee). That though is also an advantage because they will work with or without a home automation system in operation (or after you sell and take your home automation hub with you). It you do use this with a Wink though, pair the Pico remote through Wink, not using the directions provided by Lutron.You can use this remote anywhere on a wall or just loose, or in a box where a 3 or 4 way slave switch used to reside (or actually even where the 3 or 4 way switch resided). They sell a separate piece of plastic for mounting in a box, which really should be included in the package for the remote. If you do install it in a box, dealing with the existing wiring is pretty simple–you just connect all the wires together with a large wire nut (except any common wire (unlikely) or a ground). I would suggest though taking a picture of the existing switch wiring, and tag the wires as necessary so that you can easily reverse the process if you remove the Lutron switch.As to the remote, it is actually a bit nicer than the wireless switch I paired it with because the middle button can be set to turn on to a remembered brightness level, where the on button remains full bright. Other than that, this product works as well as any wired slave switch–assuming distance is not too great.As to distance, for use with a Wink system it would be distance to the Wink hub. For use without a hub it would be distance to the wired switch. I did not test out distance, but I have not had any issues with them being on a different floor than my hub, but they are virtually right below the hub, so the distance is not great.Anyway, I generally do not like proprietary systems, but here it actually does provide some benefit.

I turned a Lutron Diva in a 3-way easily, without any wiring. Connecting the remote with the Diva is very easy and worked the first time. You can connect many remote to a Diva.The remote is the size of the inner part of a standard switch (so relatively small). It has a sticker behind so you can stick it anywere. It has a battery garanteed for 10 years and it does not seem to be replacable.

producto con un precio excelente ademas que nos ayuda a poder controlar de manera remota sus accesorios de la marca desde un pedestal, una visera del auto o montados como un apagador de pared sin necesidad de cablear

Usado para casetta wireless. La verdad compre estos dos pues es muy cómodo usarlos o usar el teléfono con la app todo dependerá de tus necesidades. Tiene un botón en medio, ese es para grabar la atenuación que más gustes.