Litcessory Controller to 7-Pin Adapter for Cync [formally C by GE] Smart Light Strip (White)

Litcessory Controller to 7-Pin Adapter for Cync [formally C by GE] Smart Light Strip (White)

Compare

Product Description

Controller to 7-Pin Adapter

C by GE only allows for a single continuous lightstrip run. Litcessory products allow for several!

This controller to 7-pin adapter, specifically designed for the C by GE Lightstrip system, allows for any Litcessory product or a C by GE Smart Light Strip Extension to be connected directly to a C by GE Lightstrip controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your C by GE Lightstrip controller.

These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller’s connector size being smaller than any Litcessory product or a C by GE Lightstrip Extension (the Detachable Version).

One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 7-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a C by GE Lightstrip Extension.

This product is great for…

Any custom lighting setup where a Litcessory extension cable is placed between the controller and the first strip of lightsInstallations where the controller needs to be placed in a different location than the first strip of lights (for example, to reach a power source)

MADE FOR INDOOR DRY LOCATIONS ONLY

.

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

How do I extend the distance between the controller and the lightstrip?

To extend the distance between the controller and the lightstrip, you will first need to connect one of our controller to 6-pin adapters. Then you can plug in an extension cable.

Endless Design — create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room — the possibilities are endless!
Easy Installation — easy to use! Our cables are flat & flexible and all pin connectors are removable.
Tech Specs — designed for the Cync [C by GE] Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only.
Required — this adapter is necessary if you are connecting any Litcessory product or a Cync [C by GE] Extension Lightstrip directly to the controller!
Litcessory’s 2 Year Warranty — We know you’ll love this product, but if you have any issues at all, just send us a message and we’ll be happy to assist!

$18.19

Compare


Price: $18.19
(as of Jan 08, 2025 08:46:58 UTC – Details)


Product Description

Controller to 7-Pin Adapter

C by GE only allows for a single continuous lightstrip run. Litcessory products allow for several!

This controller to 7-pin adapter, specifically designed for the C by GE Lightstrip system, allows for any Litcessory product or a C by GE Smart Light Strip Extension to be connected directly to a C by GE Lightstrip controller. There are two version of this adapter, a hardwired version and a detachable version. You will need to identify which version you need by looking at your C by GE Lightstrip controller.

These adapters solve the issue created by the starter lightstrip either being directly attached to the controller (the Hardwired Version) or the issue created by the controller’s connector size being smaller than any Litcessory product or a C by GE Lightstrip Extension (the Detachable Version).

One adapter connects to the controller and the other attaches to the starter lightstrip. Once both adapters are attached, it will provide a 7-pin connection between the controller and the starter lightstrip that can be used to attach any Litcessory product or a C by GE Lightstrip Extension.

This product is great for…

Any custom lighting setup where a Litcessory extension cable is placed between the controller and the first strip of lightsInstallations where the controller needs to be placed in a different location than the first strip of lights (for example, to reach a power source)

MADE FOR INDOOR DRY LOCATIONS ONLY

.

Frequently Asked Questions:

Will Litcessory products cause my lightstrip to be dimmer?

No, Litcessory products do not affect the brightness of the lights, as long as your total lightstrip run length (lightstrips plus any Litcessory product length) stays within 10 meters/33 feet, your lights will be just as bright!

What is reverse polarity, and how do I fix it?

Reverse polarity happens when you plug in the wrong side of a 6-pin connector. The flow of electricity gets reversed, and the lightstrip won’t turn on. This is a common occurrence when setting up your project and it is easily fixed.

How do I extend the distance between the controller and the lightstrip?

To extend the distance between the controller and the lightstrip, you will first need to connect one of our controller to 6-pin adapters. Then you can plug in an extension cable.

Endless Design — create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room — the possibilities are endless!
Easy Installation — easy to use! Our cables are flat & flexible and all pin connectors are removable.
Tech Specs — designed for the Cync [C by GE] Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only.
Required — this adapter is necessary if you are connecting any Litcessory product or a Cync [C by GE] Extension Lightstrip directly to the controller!
Litcessory’s 2 Year Warranty — We know you’ll love this product, but if you have any issues at all, just send us a message and we’ll be happy to assist!

Category: Tag:

Based on 2 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. Adam Domingueztoscano –

    Work as they should. Good product.
    Both shorter and longer extension adaptors seems to work great, but i cant seem to find a 7-pin connector in order to cut my C by GE LED light strip. I realize these extension are not for that purpose, any recommendations on what i could us so i can cut and reattach my LEDs?

    Adam Domingueztoscano –

  2. LC –

    Fail
    Did work for what I needed. I needed to attach two light strips.

    LC –

Related products