DEWENWILS 3 Way Wireless Light Switch, 125V Wireless Light Switch and Receiver Kit with Magnetic Panel, Ideal for Ceiling Light, Fan, Lamp, 100FT Range, Neutral Wire Needed, FCC Listed


Product Description

wireless light switchwireless light switch

wireless light switchwireless light switch

3 Way Wireless Light Switch 3-WAY WIRING DIAGRAM hwls11g
1 SINGLE POLEWIRING DIAGRAM

2 3-WAY WIRING DIAGRAM

3 Note

wireless light switchwireless light switch High Quality

The receiver is made of V0 grade fireproof material for peace of mind when using it.

wireless light switchwireless light switch Long Lifespan

Short pressing stroke, comfortable angle and ergonomic design The product has been tested for 100,000 presses

wireless light switchwireless light switch 100FT Control Range

Strong RF signal works through walls and doors without any interference

wireless light switchwireless light switch Programmable and Expandable

Available to add extra remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use

Dewenwils Remote Control&Wireless Light Switch Series.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.0 out of 5 stars

100

4.3 out of 5 stars

64

4.3 out of 5 stars

3,141

4.3 out of 5 stars

3,141

4.7 out of 5 stars

7,897

4.7 out of 5 stars

4,663

3.8 out of 5 stars

86

Price

$21.24$21.24

$14.99$14.99

$13.99$13.99

$17.84$17.84

$15.99$15.99

$13.99$13.99

$19.99$19.99

Components

1 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

2 Pack Switch + 1 Receiver

2 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

1 Motion Sensor + 1 Receiver

Power Rating

7A/ 875W

15A/ 1875W

10A/ 1250W

10A/ 1250W

15A/ 1875W

15A/ 1875W

15A/ 1875W

Wireless Range

100 FT

100 FT

100 FT

100 FT

100 FT

100 FT

100 FT

Programmable and Expandable

Diagram

Single Pole& 3 Way

Single Pole

Single Pole

Single Pole

/

/

/

Product Dimensions ‏ : ‎ 4.48 x 2.74 x 0.5 inches; 2.08 ounces
Item model number ‏ : ‎ HWLS11H
Batteries ‏ : ‎ 1 CR2 batteries required. (included)
Date First Available ‏ : ‎ March 21, 2023
Manufacturer ‏ : ‎ DEWENWILS
ASIN ‏ : ‎ B0BZ46CQCK

[No In-Wall Wiring Needed] Connect our wireless switches for lights between the power and lights using wires, no need for in-wall wiring; add more lights to your system without hassle, without disrupting your current setup
[3-Way Wiring Method] According to your specific requirements, you can select 3-way wiring method or single pole wiring method to complete home’s switching needs; this wireless light switch kit can be used as a normal switch; neutral wire required
[Magnetic Panel & Compact] The remote light switch with magnet can be installed anywhere and is more convenient to pick up; compact size suitable for limited space, easily incorporated into a wide range of decorating styles
[100FT Control Range] Strong RF signal works through walls and doors without any interference; wireless light switch 3 way does not require line of sight while using; up to 100ft range in open areas; FCC certification
[Wide Application] DEWENWILS wireless light switch kit and receiver kit is ideal for indoor lighting fixtures, ceiling light, plug-in pendant light, hard-to-reach light, and other electric appliances using a simple push of a wall switch

$21.24

Compare


Price: $21.24
(as of Jan 03, 2025 03:34:55 UTC – Details)


Product Description

wireless light switchwireless light switch

wireless light switchwireless light switch

3 Way Wireless Light Switch 3-WAY WIRING DIAGRAM hwls11g
1 SINGLE POLEWIRING DIAGRAM

2 3-WAY WIRING DIAGRAM

3 Note

wireless light switchwireless light switch High Quality

The receiver is made of V0 grade fireproof material for peace of mind when using it.

wireless light switchwireless light switch Long Lifespan

Short pressing stroke, comfortable angle and ergonomic design The product has been tested for 100,000 presses

wireless light switchwireless light switch 100FT Control Range

Strong RF signal works through walls and doors without any interference

wireless light switchwireless light switch Programmable and Expandable

Available to add extra remotes, outlets and light sockets (Same Model Only); transmitter and receiver have been pre-programmed for immediate use

Dewenwils Remote Control&Wireless Light Switch Series.

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.0 out of 5 stars

100

4.3 out of 5 stars

64

4.3 out of 5 stars

3,141

4.3 out of 5 stars

3,141

4.7 out of 5 stars

7,897

4.7 out of 5 stars

4,663

3.8 out of 5 stars

86

Price

$21.24$21.24

$14.99$14.99

$13.99$13.99

$17.84$17.84

$15.99$15.99

$13.99$13.99

$19.99$19.99

Components

1 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

2 Pack Switch + 1 Receiver

2 Pack Switch + 1 Receiver

1 Pack Switch + 1 Receiver

1 Motion Sensor + 1 Receiver

Power Rating

7A/ 875W

15A/ 1875W

10A/ 1250W

10A/ 1250W

15A/ 1875W

15A/ 1875W

15A/ 1875W

Wireless Range

100 FT

100 FT

100 FT

100 FT

100 FT

100 FT

100 FT

Programmable and Expandable

Diagram

Single Pole& 3 Way

Single Pole

Single Pole

Single Pole

/

/

/

Product Dimensions ‏ : ‎ 4.48 x 2.74 x 0.5 inches; 2.08 ounces
Item model number ‏ : ‎ HWLS11H
Batteries ‏ : ‎ 1 CR2 batteries required. (included)
Date First Available ‏ : ‎ March 21, 2023
Manufacturer ‏ : ‎ DEWENWILS
ASIN ‏ : ‎ B0BZ46CQCK

[No In-Wall Wiring Needed] Connect our wireless switches for lights between the power and lights using wires, no need for in-wall wiring; add more lights to your system without hassle, without disrupting your current setup
[3-Way Wiring Method] According to your specific requirements, you can select 3-way wiring method or single pole wiring method to complete home’s switching needs; this wireless light switch kit can be used as a normal switch; neutral wire required
[Magnetic Panel & Compact] The remote light switch with magnet can be installed anywhere and is more convenient to pick up; compact size suitable for limited space, easily incorporated into a wide range of decorating styles
[100FT Control Range] Strong RF signal works through walls and doors without any interference; wireless light switch 3 way does not require line of sight while using; up to 100ft range in open areas; FCC certification
[Wide Application] DEWENWILS wireless light switch kit and receiver kit is ideal for indoor lighting fixtures, ceiling light, plug-in pendant light, hard-to-reach light, and other electric appliances using a simple push of a wall switch

Customers say

Customers find the electronic switch easy to install with clear wiring instructions. It works great and is responsive.

AI-generated from the text of customer reviews

Based on 13 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. ScavengeR

    easy to install, works right away, responsive
    easy to install, works right away, place the remote where you want with double face tape, responsive. some say it takes seconds to trigger, I say BS. they have a source of interference probably. mine triggers instantly. yes the inside pictures look crusty, it’s chinese what did you expect. it worked for 3 months so far, so good.

    ScavengeR

  2. G. Miller

    Perfect for what I needed
    My garage has a 3-way light switch circuit, but I needed another switch in a 3rd location. Tearing up drywall and running wiring was a non-starter. This was the only wireless add-on I could find that would allow me to add another switch on an existing 3-way circuit.There were clear wiring instructions in the box for whichever type of circuit you were adding it to. I replaced one of the existing 3-way switches (the one wired to 120 power, not wired to the light fixture) with the included switch, and then put the wireless add-on where I needed it. Works perfect. I’m very happy.

    G. Miller

  3. Douglas H.

    Nice switch
    Pros easy ti install but recommend reading directions.as only one red line out is used for an install with existing single pole switch.Would have liked a switch plate to come with primary switch. You only get one for the remote switch.

    Douglas H.

  4. Luis

    They lose Connection very often
    I bought two of these switches, I installed one at my work and one at my house. They both lose connection at least once a month and I have to go to the main breaker and turn it off and on again for the switch to connect. I do not recommend this brand.

    Luis

  5. Gail Pedrick

    Great product but has one minor subtlety
    This brand seems to work very well and I would buy again. I have one of the remote switch units where there is portable/installable toggle with a receiver unit you install inside a junction box. The other one I purchased was the remote 3-way with local 3 way replacement switch. Both work great. The only thing I would do as the manufacturer would be to swap the internal relay with a latching one. The impact of the existing design is that if the power goes out and returns, the 3-way switch always returns to one position with no memory of pre-power outage state. Where this would be an issue for example, is say the light being controlled is outside or in the attack and not regularly used. If the light is off (based on the position of the other conventional 3-way and the setting of the this receiver switch, a glitch in the power would reset the receiver to the alternate position which means the bulb would be on when the power returns and potentially go unnoticed for a long time, wasting energy. A partial band-aid is to set both 3 way switches such that receiver switch power position results in the desire power up state by toggling the conventional switch to the other position. You could even go one step further if you wanted by swapping the traveler hots at either location. (Consider the scenario where one switch is at the bottom of a seldom used attic for second floor stairway to understand). Anyway, the manufacturer could just switch to latching relay for little or no price difference. The other thing that would be nice is if you could purchase all switches and modules separately for a case where you want multiple remote switches controlling one bulb or vice versa (now you have to buy complete sets and have spare parts.

    Gail Pedrick

  6. sfish

    Convenient
    Now I can thrn on the light at the door and turn off on my bed. Very convenient.

    sfish

  7. Brian Pohl

    works great
    Easy fix for an inconveniently placed light switch. If your current switch has a neutral wire in the box , this will work.Comes with 2 switches: 1 is remote, the other is wired.My only complaint is the remote switch is not set up to be placed in a regular switch box.

    Brian Pohl

  8. Akira Fumi

    Cheap but not UL or CSA rated. No wallplate included!
    Cheap remote kit and the components used reflects the price point. As another reviewer said, there’s no way to ground it but that’s probably OK due to its full plastic construction. In any case, it’s not a problem in older buildings where lighting circuits are ungrounded.This is neither UL or CSA rated, and that’s likely because it lacks a ground connection and the fact that it’s limited to 7 amps rather than being able to withstand up to 20 amps like a normal light switch.Regardless, it works well as advertised (at least for single pole wiring), especially in the ungrounded lighting circuit I installed this switch in. But due to the cheap components used, I can’t say how long it will last. If this was installed in a high traffic area, I probably would’ve gotten an Insteon or Zigbee or Z-Wave type switch instead, but the light this switch controls won’t be used often, so I can’t justify the higher cost for a brand name switch.Beware that this doesn’t include a wallplate, so don’t forget to buy it also!

    Akira Fumi

  9. Playsinshop

    Garage had two light switches: one by an outside door and one inside the door of the door to the house. I had to stumble down 2 stairs to fumble in the dark for the switch! Now I have this new switch on the INSIDE of the door from the house to the garage and it operates the switch by the outside garage door remotely. If you have a 3-way circuit (two switches operating one light) be sure you replace the correct switch. My handyman said the instructions were clear. And it works great! No more fumbling in the dark to find the switch!!!

    Playsinshop

  10. Jacquelyn

    Works perfectly. Wireless remote is a 2032 battery. We use daily at least 4 times a day, and have not needed to replace the battery yet. We’re on a few months now. So thankful for this idea, helped drastically with horribly places light switches. And love thay the original switch, is still functional.

    Jacquelyn

  11. Amazon Customer

    My first review was a little bit frustrating because the wall switch stopped working in two months, but I received a message from the seller with instructions on what to check. They thought it might be a programming issue. But it was a different issue and easy to fix. I removed the faceplate and found that the switch had fallen off from the switch housing. Maybe somebody pressed it too hard. I put it back, and it works now. It’s a good product overall. Very convened.

    Amazon Customer

  12. Amazon Customer

    The wired switch works ok, you can only control it from the bottom. The wireless switch is junk and hardly works

    Amazon Customer

  13. Amazon Customer

    I have lived in my house for 20 years & the only switch to control the upstairs light has been at the bottom of the stairs. This was a fantastic alternative to expensive rewiring/drywalling! After figuring out my particular wiring & selecting the appropriate diagram for my situation, everything went very quickly! I love that there is a wired component that fits in the existing switch plate & a wireless switch (either installed on the wall or used as a remote control), now installed upstairs. It is now hassle-free light operation! 💡🎉

    Amazon Customer