Fosmon Remote Control Outlet Plug Indoor, Wireless Remote Light Switch, No Interference, Battery Operated Outlet Plug with Remote Braille On/Off Mark, 15A/1875W, No Wiring & Expandable- 5 Pack

These work great
I use these units to run my game room of 4 pinball machines, one large lighted pinball sign, revolving statues, other lighting; even a clock lights up. You name it. That one little remote fires up the entire thing, or just parts of it. And it takes two kits to do it combined on one remote. It sure beats a long row of switches on the wall and skips all the wiring and the thousands of dollars to have it done. And these things really spoil you let me tell ya. And they only use the power of a modern LED nightlight. One of the pinball machines is very old and I was surprised this unit could handle it, as it uses 10x’s the power of the rest. But no problems and it’s been 6 years now and one battery in the remote later, and I just changed it. I believe it comes with a wall bracket for the remote, I don’t remember. Velcro will stick it anywhere. I highly recommend these units and you can combine kits, my game room runs on two kits, combined on one remote. And it’s really easy to set up and you can add them later. I have another set upstairs in the Master doing 5 more things on two buttons and they don’t interfere with each other being one floor apart. After a power failure, just let them sit a couple minutes and they’ll remember what they were doing. I’ve never had a problem in 6 years and mine do a lot of stuff.

Great Item BUT Here’s a 3 Big Tips
I purchased 3 sets of 5 outlets. I almost didn’t buy them given the reviews & products questions which indicated they do not retain their settings after a power outage. I just spoke with their tech who said they do. When the power comes back on the outlets will blink & go into pairing mode again for 29 seconds. Just do not touch them during that time & once pairing mode stops they should work as programmed before the power outage. Second tip: I could not figure out how to get the second remote to pair with an outlet. I was told once the first remote was paired to unplug then plug back in the outlet, putting it in pairing mode again & pair the second remote to it. Third tip is before starting, check the battery compartment for a plastic barrier. Mine couldn’t be seen. I had to remove the batteries & it fell out. None of these 3 tips are described in the operation paper included in the set. Otherwise, I expect these to perform for a long time and if they loose their pairing after a power outage, I’ll update this review.

Lasted about 2 years
Really like it. Very easy to set up the outlets. Came with 2 remotes and one finally died after about 2 years or so. Using it to control desktop fans. It turns on (or off) outlets at random now. Now I never know which fan will turn on. The other remote still works, tough.

No bind button! So they’ll rebind without you wanting them to and it’s a security risk
All switches I’ve bought from this brand loose their binding and rebind in random ways, which is super annoying and a security risk.The reason is that when they are powered on, they ALWAYS go into bind mode. So if you press any button on any remote in range during that (long!) time they then bind to that. This is a problem as I use most of them in a workshop who’s power I switch off when not in use. So you can imagine what happens when I switch my workshop on try to turn on a light…everything turns on and all other buttons now do nothing… And I have to rebind everything. It’s also a security risk and presents an issue when power fails. For example, suppose anyone else has one of these remotes and presses a button after a power failure. All your devices will then be controlled by that one button on that remote.I’m guessing this was done to save a few cents by not having a bind button.

Sirven perfectamente para conectar luces indirectas

Estos controles son muy fáciles de instalar y programar. Estoy acostumbrándome mucho a ellos y ya los puse en varias partes. Te van a encantar.