TOPGREENER Motion Sensor Light Switch Dimmer, Electronic Dimmer with PIR Motion Sensor, Occupancy & Vacancy Modes, 150W LED/CFL, Single-Pole, UL Listed, TDODS5-120, White

Functional!
Like: works pretty well, both motion detector and dimmer.Dislike: it took an hour to install just one. Too bulky leaving no space for wires. Had to chop existing and switch wires to fit it in. Screws could be longer, had to use a longer screws to grab the box.

Wont turn off
Take notice there are a lot of reviews for different items. This review is for the version that dims. I am an electrician so no problem wiring this ting and hooking it up. It is a bit big but most dimmers and motion sensors are big. Side note – the description on Amazon says a neutral is required but that’s incorrect. There is no neutral off this unit AND the directions say “no neutral required”. Why the poo rating? It doesn’t work in several ways. First I can’t get it to shut the lights off. I tried adjusting the time and even put a piece of electrical tape over the sensor. Then I tried resetting the breaker. Nothing worked. The directions say you can change modes by holding the up and down brightness for 5 sec which will cause the LED to flash 1. The LED’s don’t light up or flash at all 2. it wont change modes. I jumped on Amazon to find another person had the same problem where it wont turn off. Lucky me the return window is open and it going back. Straight junk. The next one I will buy from the big box store. Does it detect motion well? How would I know – it wont turn off to test it capabilities.

May not work with your LED lights
I liked the design of this dimmer with separate switch and dimmer. Install was straight forward, but I ran into a problem with my LED track light flickering of the brightness level is turned up. I only have 3 9 watt lights so this is disappointing. I tried contacting the seller numerous times via their link and it doesn’t work, so no support. I wouldn’t recommend buying product from a seller that you can’t contact.

As others have said – not instant on
There’s a one second delay and that disappoints me because I thought those days were long gone. That aside I like the rocker and the slider a lot. There’s plenty of resistance (but not too much) on the rocker unlike every single other chinese branded dimmer switch I’ve tried from this site. Also enough space between the slider and rocker so one doesn’t interfere with the other.

Worked great for our situation. We installed them horizontally, which makes the switches vertical like a normal switch . And that allows the dimmer to operate vertically as well,which I feel simplifies the operation. (Down- off , up- high). Side note,. I made the mistake of buying these switches to put at both ends of the circuit. Do not do that, for whatever reason the dimmer switch part basically fights to be the master and cancel each other out. So purchase regular switches for the other side. If you want dimmer control at both ends the only option I know of is a wireless 3 way switch.

I ordered two. Neither came with a wall plate as stated in the lead description. Using one or two 60W LED lamps, with the adjustment wheel, you cannot set this to dim the lamp completely off. Is this by design? It does prevent leaving the dimmer operating unnecessarily as the lamp is always at least dimly lit.