TASMOTA Smart Dimmer Switch by Martin Jerry | ESP8266, Smart Light Switch That work with Home Assistant | 2.4G WiFi Smart Home Devices and Needs Neutral Wires, 4-pack

TASMOTA Smart Dimmer Switch by Martin Jerry | ESP8266, Smart Light Switch That work with Home Assistant | 2.4G WiFi Smart Home Devices and Needs Neutral Wires, 4-pack

Compare

smart switch Compatible with Alexan and Google Assistant Cannot work with Homekit and Siri
Product Dimensions ‏ : ‎ 4.22 x 1.53 x 1.53 inches; 1.32 Pounds
Item model number ‏ : ‎ SD01
Date First Available ‏ : ‎ August 26, 2022
Manufacturer ‏ : ‎ Martin Jerry
ASIN ‏ : ‎ B0BC42G66B

TASMOTA: This switch is TASMOTA build in, users do not need to flash by themselve. ESP8266 chip, Do NOT work with Smart Life App and supports 2.4G WiFi Only
Installation: This wifi switch is single pole (NOT 3 way smart switch). Neutral required and 2.4G WiFi is necessary.
Specifications: 100-240V, dimmer for LED bulbs up to 150W.
Home Assistant: with MQTT set well, you can link it into your Home Assistant platform easily. Then, you can also use Alexa and Google Home to contorl it
Support: Martin Jerry promises 90-Day 100% refund, 1-year quality warranty for it’s smart home products on Amazon. Tech support messages reply within 24h

$78.99

Compare


Price: $24.99 - $78.99
(as of Dec 16, 2024 11:25:37 UTC – Details)



smart switch Compatible with Alexan and Google Assistant Cannot work with Homekit and Siri
Product Dimensions ‏ : ‎ 4.22 x 1.53 x 1.53 inches; 1.32 Pounds
Item model number ‏ : ‎ SD01
Date First Available ‏ : ‎ August 26, 2022
Manufacturer ‏ : ‎ Martin Jerry
ASIN ‏ : ‎ B0BC42G66B

TASMOTA: This switch is TASMOTA build in, users do not need to flash by themselve. ESP8266 chip, Do NOT work with Smart Life App and supports 2.4G WiFi Only
Installation: This wifi switch is single pole (NOT 3 way smart switch). Neutral required and 2.4G WiFi is necessary.
Specifications: 100-240V, dimmer for LED bulbs up to 150W.
Home Assistant: with MQTT set well, you can link it into your Home Assistant platform easily. Then, you can also use Alexa and Google Home to contorl it
Support: Martin Jerry promises 90-Day 100% refund, 1-year quality warranty for it’s smart home products on Amazon. Tech support messages reply within 24h

Customers say

Customers find the electronic switch easy to install and setup. It works well with ceiling LEDs and is reliable. The build quality is good, and the switch is solid. The LEDs are a good brightness for most places, and the software records the button selected dimmer, so you can fiddle with it via the API.

AI-generated from the text of customer reviews

Category: Tag:

Based on 9 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. Taylor –

    Excellent for Home Assistant!
    I have purchased many of the Tasmota version and they are reliable and easy to use. They work great with home assistant allowing for local control of your devices.

    Taylor –

  2. TJNII –

    Good quality unit
    This Tasmota pre-flashed unit works out of the box with no internet connectivity requirements. You will need a wifi network with DHCP, but that’s it. I disassembled the unit and the build quality was good, it appears to be on-par with other name-brand in-wall modules I’ve bought at the local home center. The main switch is a proper microswitch, not a cheap PCB pushbutton, so it should last. The tactile feel is very different from a regular switch, though, so be advised. More like clicking a mouse than toggling a switch. The Tasmota firmware supports a timer mode so this is a no-brainer replacement upgrade for in-wall timers. I recommend and am glad this company is making them.The dimmer function is pretty neat. The software records the button selected dimmer, so you can fiddle with it via the API but when you hit the button it goes back to the button selected level. I can see that being useful. It does have a relay so when it’s off it’s off. It also has a temperature sensor on the triac for overtemp protection. That said the dimmer triac is a TO-220 package in a plastic box in the wall, so the low watt rating is real. Bench testing it with a incandescent bulb it behaved exactly how I’d expect.It does need a unswitched power feed with a neutral wire. Design requirement, no way around it. The one point I didn’t like is the mounting ears are plastic, with the cover screws threading into plastic. It didn’t seem to be an issue on install into a properly leveled box, though, the screws tightened okay and the switch was solid.

    TJNII –

  3. S. Emery –

    Good quality switches
    I purchased three of these to control some exterior lights. The build quality was great and they installed with ease. By the way, it’s not listed anywhere, but in case you’re wondering the depth the switch required inside the electrical box is slightly over 1.25 inches (plus wires). This is important, since many electrical boxes don’t have a lot of space.The switches came with Tasmota 12.1, which I was able to easily upgrade to 14.1. For the person who received switches with version 6.3 and failed to upgrade to 12.1: be aware that a direct upgrade is not possible. See the tasmota upgrade documentation; you’ll need to go through several version upgrades to get to 12.1.I use my own scripts with cron to control the lights, so I can’t speak to Home Assistant or other automation platform compatibility. But the HTTP interface to the switches works perfectly. I’m able to turn them on/off, set the dimmer level, and get the current status. The response time when executing these commands is instantaneous.The one negative I have is that the dimmer range is not very good. I think this is because I use LED lights and this switch has leading-edge dimming. When the dimming level is set to 45% the lights are basically off. 50% is barely on. Martin Jerry makes another switch, the US-SD-TC01 which has trailing-edge dimming, that is more suitable for LED lights. I should have done more research and picked those switches for my application, but that’s on me not the switches, so I’m not going to take away any stars for that. Plus, I just set the lights between 50% and 100% instead of 0% to 100%.Overall, I’m quite happy with these switches in the short time I’ve had them.

    S. Emery –

  4. Tyler Wilson –

    Great Tasmota integration, and great for ESPHome.
    Really glad to see Martin Jerry supporting open firmwares. They have good quality switches, and the setup process and usage is so much better with Tasmota. ESPHome was easy enough to flash, and works great. The only hiccup is that you have to be sure to flash Tasmota minimal before flashing your ESPHome firmware. After flashing, you might need to power cycle the switch to get dimming to work properly.Hardware wise, the buttons have good tactile feedback and aren’t mushy. The LEDs are a good brightness for most places, and are really nice for finding the switch in the dark. By default, the ESPHome firmware from the esphome-devices website has the red LED on when the switch is off, which works well.

    Tyler Wilson –

  5. mark –

    Works awesome!
    Powered it up, configured tasmota, and it worked flawlessly. So easy, I definitely will use in future.

    mark –

  6. GNOE –

    failed after 3 months
    this device was easy to install and setup in Home Assistant but unfortunately it failed yesterday after 3 months from purchase. Sent an email to manufacturer to see if they will warranty it

    GNOE –

  7. Joe –

    Out of the box Tasmota support
    Tasmota support without having to flash it is great. Tasmota has many options that make it extremely useful without any additional home automation environment. The ability to define tasmota groups that use multicast without relying on Openhab or Home Assistant is very useful and extremely reliable. That said, open source support for multiple HA integrations is also very useful.

    Joe –

  8. AK –

    Do not upgrade Tasmota firmware to newer versions with this switch
    This device came with Tasmota 6.3.x version of software. Upgrading firmware to the most recent version partly breaks functionality of physical controls on switch, adding annoyance to button controls. Old firmware is not possible to find as best as I can tell, as it is a mystery exactly what specific version was there to begin with. There are obviously repositories of old firmware, but not clear which will resolve issue. The manufacturer needs to provide warning on switch and in documentation for not doing a firmware update, as this is obviously not a new issue as we are at version12.1.1 of Tasmota, and also provide the old firmware so that a downgrade is possible to Tasmota 6.3.x. Otherwise this is a great switch, really appreciate that it comes with Tasmota already, easy installation, Without this particular odd firmware problem, which obviously is not directly related to the manufacturer specifically, I would have given 5 stars.

    AK –

  9. Client d’Amazon –

    Fonctionne très bien, je l’utilise en domotique avec mon serveur Domoticz, facile à installer et à configurer.

    Client d’Amazon –

Related products