MOES 2.4GHz Wi-Fi Smart Light Switches, Netural Wire Required, Inteligente Single Pole Switch, Work with Alexa Google Assistant, Remote Control, No Hub Required

Great WiFi Switch for tight spaces
Hadn’t heard of Moes, but the 3-gang switch was cheap enough to just try it. It’s very easy to hook up if you know anything about swapping switches. I was able to wire it up fairly easily, since there is only one line, I pigtailed it with the 3 switch power wires. Then the 3 load wires insert in the back. The screws are small, but seem to be sturdy enough to hold the wires. Manual operation was working fine. I then downloaded the Moes app, could have used Tuya if I had it. The apps are the same, just different “skin”. The QR code indicated a 4-gang and not 3-gang, and it takes several minutes for it to recognize your 2.4Ghz WiFi. That made me second guess the setup and I went back in the app to manually select switch, but then too many choices for 3-gang switch. It would have been nice if the box or docs could have indicated which switch to manually choose in the app. Anyway, long story just to say – be patient – the “choose WiFi” screen stays up for a long time – 4 minutes or so before it asks for the password. Once I did that, the rest was cake by the ocean. Renamed the switches to what I wanted them to be. Oh, and icing on the cake was that the entire switch group(all 3 switches) are listed as the 4th switch on the app. So, the 3-gang switch (named mine LED lights) is easy way to turn all 3 on or off. You say why? Because I’m using my 3 switches to control my upper cabinet lights, the under-counter lights, and the toe kick lights on my base cabinets in the kitchen. So with Alexa, I can say “turn on the LED lights” and all three turn on. Really great switch. I am thinking of buying a spare just in case this one goes bad. Seems like all of the really cool stuff disappears after a few months.

Product is OK. App is trash. Use SmartLife instead.
I bought this switch with a specific purpose in mind. I wanted to convert a double gang set of switches to one slot so I could install an outlet in the other. One of the switches to be replaced controls the light in a walk in closet. I like motion switches for closets, but this one is on a wall outside the closet. So, by making it a smart switch I could put a stand alone motion detector inside the closet and set routines to turn it on and off.This switch fit the bill. Physical installation was straightforward and easy. Find the supply hot wire and both loads, hook to the marked terminals at the top of the switch. Add a jumper from the neutral wires since the old switches were load only.I followed the directions and downloaded the MOES app and created an account. Tried to add the switch and it warned me about 2.4 GHz wifi only. My ISP provided gateway REALLY wants you to use the same SSID for 5 and 2.4 GHz networks and it is a PITA to change it. I had a 2.4 only extender available and switch my phone to it and was able to set up the switch.Then I went to set up the link to my SmartThings app so I could control it with a Zigbee motion detector. The instructions told me to link SmartLife, which I had already done for some smart plugs I have had for a couple of years. That’s when I figured out the MOES app is just a pared down version of SmartLife.Deleted the switch from the MOES app and opened SmartLife. The switch was already detected and added with a single click. SmartLife then made it available to SmartThings and I was able to set the routines using my Third Reality motion detector.So, my advice is skip the MOES app and use SmartLife instead. Integration to SmartThings and Alexa are easier.

Short lived excitement
The 4 gang switch lasted for about 8 months working well then all of a sudden it would take forever to come on. By the time I finally noticed that pattern it had stopped coming on all together stop responding to any commands both by app and by physical touch.

Does exactly as advertised
Perfect! It’s all connected to Alexa for easy on/off control. The quality might feel a bit cheap, but since it’s a smart switch, you should rely on Alexa to manage it rather than using the buttons manually. This way, build quality isn’t an issue. It’s the only 4-gang switch I’ve found that fits a single box. The design is simple, and installation was straightforward.

Justo lo que buscaba; un apagador con sensación mecánica e inteligente, con luz piloto configurable blanca.Ahora, el plástico es ligeramente translúcido en ligar de ser un color sólido entonces hay un resplandor de la luz piloto visible por la tarde/noche que preferiría no estuviera. Idealmente solo debería verse la luz piloto y sería bueno que se pudiera atenuar, tal vez asi disminuiría ese efecto de resplandor.

Pasan los días y de tres botones que tiene ya solo sirve uno. Sirvió, se ve bien, pero cada vez sirve menos. Me duró al 100% alrededor de 8 meses, después dejó de servidor el botón inferior y hace 1 mes dejó de servir el botón de en medio.

Prendio y se conecto a la aplicacion pero no apagaba ni prendia la luz para que quieres un interruptor que no prenda y apage la luz