Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire, Works with Google Assistant, Alexa, & SmartThings, Z-Wave Hub Required, Smart Home, 700 Series, 58433

Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire, Works with Google Assistant, Alexa, & SmartThings, Z-Wave Hub Required, Smart Home, 700 Series, 58433

Compare

Home automation is even smarter with the Enbrighten Z-Wave In-Wall Smart Switch with QuickFit™ and SimpleWire™. When paired with a compatible hub, the hardwired smart switch operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, HomeSeer, Vera, American Standard and more. About Z-Wave Plus and 700 series with S2 security and SmartStart Z-Wave Plus and 700 series further enhance the security and simplicity of previous Z-Wave products. In addition to remaining backward compatible with all Z-Wave generations, 700-series devices feature multiple advancements, including: €¢ Over-the-air updates and doubled internal memory. €¢ More powerful, robust network capabilities. €¢ S2 security with best-in-class secure key exchange to add a layer of 128-bit encryption. €¢ SmartStart, which offers unique QR codes for fast, easy pairing. €¢ Up to five-year battery life with one coin cell for battery-powered devices.
Product Dimensions ‏ : ‎ 1.78 x 2.36 x 4.13 inches; 6.38 ounces
Item model number ‏ : ‎ 58433
Date First Available ‏ : ‎ December 30, 2022
Manufacturer ‏ : ‎ Jasco Products
ASIN ‏ : ‎ B0BRDG5JJV
Country of Origin ‏ : ‎ Malaysia

Revolutionary design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever.
QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
SimpleWire – Patented auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub.
Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures.

$46.86

Compare


Price: $46.86
(as of Dec 12, 2024 17:37:07 UTC – Details)



Home automation is even smarter with the Enbrighten Z-Wave In-Wall Smart Switch with QuickFit™ and SimpleWire™. When paired with a compatible hub, the hardwired smart switch operates wall, ceiling and accent lighting through individual commands and programmed settings. Wirelessly control and schedule indoor or outdoor fixtures for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Ring, Wink, SmartThings, HomeSeer, Vera, American Standard and more. About Z-Wave Plus and 700 series with S2 security and SmartStart Z-Wave Plus and 700 series further enhance the security and simplicity of previous Z-Wave products. In addition to remaining backward compatible with all Z-Wave generations, 700-series devices feature multiple advancements, including: €¢ Over-the-air updates and doubled internal memory. €¢ More powerful, robust network capabilities. €¢ S2 security with best-in-class secure key exchange to add a layer of 128-bit encryption. €¢ SmartStart, which offers unique QR codes for fast, easy pairing. €¢ Up to five-year battery life with one coin cell for battery-powered devices.
Product Dimensions ‏ : ‎ 1.78 x 2.36 x 4.13 inches; 6.38 ounces
Item model number ‏ : ‎ 58433
Date First Available ‏ : ‎ December 30, 2022
Manufacturer ‏ : ‎ Jasco Products
ASIN ‏ : ‎ B0BRDG5JJV
Country of Origin ‏ : ‎ Malaysia

Revolutionary design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever.
QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
SimpleWire – Patented auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub.
Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures.

Customers say

Customers find the electronic switch easy to install and reliable. They mention it’s easy to pair to their Hubitat HUB, has excellent instructions, and is long-lasting. Customers also like its size. However, some customers are disappointed with its durability. Opinions are mixed on functionality, connectivity, and power savings.

AI-generated from the text of customer reviews

Category: Tag:

Based on 10 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. EquinoxV –

    Easy and effective smart switch
    This review is for the Add-On Switch, which works as a “slave” in a 3-way setup with a second Enbrighten switch, which works as the “master.” I found it easy to install myself and works like a charm. A few notes:The “master” switch must receive power from the breaker panel. So, you need a tester to ensure you know which switch is receiving power from the breaker. I have two of these 3-way setups at my house and in both cases it was the switch farthest away from the breaker that was receiving power from the breaker, and hence the master switch must go there. The add-on switch is installed in the secondary switch location.The master switch is also the switch that you’ll add to your smart home setup. I’m using SmartThings, and adding the master switch was as easy as scanning the QR code. No need to do it again with the add-on switch.The dimmer control is nice: just hold the up or down paddle for a moment and the light will dim. Of course, you can also ask Alexa to dim the lights.

    EquinoxV –

  2. Kevin –

    Works Great w/SmartThings
    Works good. I purchased this switch to replace one that I thought was bad. Turns out these sometimes quit due to a power surge or outage and only need to be reset. Simply pull the hot wire on the side of the switch, wait 10 seconds and reinsert. The blue light should then come on when flipping the switch.

    Kevin –

  3. Tom F –

    Make your house smarter…
    I’ve installed 50+ of these at multiple locations. They are my go to for smart switches. Easy enough to sync with your smart hub. generally speaking, the one drawback is that they occasionally fail when their are line issue/glitches/surges. I have 8 running in my own home at the moment. Would buy again

    Tom F –

  4. CW –

    Simple installation and easy to add to hub
    I have been using these GE switches for about 5 years and have had mixed luck with them. The original switches that are not zwave plus have slowly been dying on me. I’ve replaced 3 that were about 4 years old. For a switch that costs over $30 they should last longer than that… GE replaced one under warranty, but the other 2 were out of warranty.This new zwave plus version has been working well. I have 3 of these new ones, but the oldest is only 2 years. Time will tell if they last longer than the originals. I have started buying other brand zwave switches, but again can’t comment on longevity. The Zooz switches come with a 5 year warranty though. I also have a couple Leviton switches. There are many more options than there were 5 years ago.Overall this switch works well and I had no problem installing them in the electrical boxes. They are slimmer than the originals and don’t have the tabs on the side. This version still requires a neutral, so check that you have one in the electrical box before buying. Adding this to my smart things hub was simple. This device uses the newer secure setup, so make sure to take note of the serial number on the device since you will need the last digits to add the switch to the hub.

    CW –

  5. Dellworkshop –

    Excellent Switch
    Worked as described. Excellent quality and connects easily to my ADT Pulse system

    Dellworkshop –

  6. MK –

    Works with ADT Pulse
    I have been using these light switches for years with the ADT Pulse system to control various lights. They’re easy to install and enroll into the Pulse system. They need a neutral wire to operate so make sure you have a neutral in the box. A lot of older homes do not have neutral wires in existing light switch boxes so double check before ordering this switch.

    MK –

  7. Nathaniel Bornstein –

    Great Product, that does not last
    As a consumer who has invested in home automation technology, I regret to say that my experience with the Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire has been disappointing, to say the least. Despite its promises of convenience and efficiency, I’ve found myself needing to replace these switches far more frequently than anticipated.One of the primary issues I’ve encountered with these smart light switches is their durability, or lack thereof. Despite being touted as long-lasting and reliable, I’ve found that the switches tend to malfunction or fail altogether after just a couple of years of use. Whether it’s a sudden loss of connectivity, unresponsive controls, or complete system failure, the reliability of these switches leaves much to be desired.Furthermore, the need for frequent replacements adds up in terms of both time and money. Not only am I forced to spend additional funds on purchasing new switches, but I also have to invest valuable time and effort into uninstalling the old ones and installing the replacements. This becomes particularly frustrating when considering the initial investment made in setting up and integrating these smart switches into my home automation system.Additionally, the installation process, while marketed as simple and straightforward, can be cumbersome and time-consuming, especially when dealing with replacement switches. The promise of QuickFit and SimpleWire features falls short when faced with the reality of compatibility issues and the need for additional adjustments and troubleshooting.Overall, I cannot in good conscience recommend the Enbrighten Z-Wave In-Wall Smart Light Switch with QuickFit and SimpleWire to other consumers. While the concept of smart home technology is undoubtedly appealing, the lack of reliability and longevity exhibited by these switches ultimately outweighs any potential benefits they may offer. Until significant improvements are made in terms of durability and performance, I would advise exploring alternative options for home automation needs.

    Nathaniel Bornstein –

  8. DrKSL –

    Just work
    Updated switches to the flat style, just work

    DrKSL –

  9. sylvain –

    Work good and good price

    sylvain –

  10. arlcrlpkcs –

    This thing cannot join the wifi with a pass phrase containing space nor with qr code. Does not work, poor instructions and i want to be reimbursed asap.

    arlcrlpkcs –

Related products