BTF-LIGHTING FCOB RGB WS2811 IC WS2812B WS2811 WS2813 SP107E Music Bluetooth Full Color Controller Support Almost All The LED IC Chip Suit for LED Strip,Matrix Panel,Module Buli-in Mic/AUX Input

BTF-LIGHTING FCOB RGB WS2811 IC WS2812B WS2811 WS2813 SP107E Music Bluetooth Full Color Controller Support Almost All The LED IC Chip Suit for LED Strip,Matrix Panel,Module Buli-in Mic/AUX Input

Compare

Product Description

11

Product Parameter :

Name : BTF-LIGHTING SP107E Addressable LED Music Controller Working voltage: DC5V~24V (voltage depends on the led strip that you use) Max Control pixels: Control up to 960 Pixels Remote distance: 20 Meters Working temperature : -20℃~60℃ Product size: 85mm*45mm*22mm Package List : 1x SP107E music controller, 1x 3pin JST connector, 1x Female DC connector, 1x 1 to 2 Audio cable, 1x Mini screw driver . Support LED IC : Supports RGB IC types .Such as FCOB RGB WS2811 IC, WS2812B,WS2811,WS2813,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix . NOTE : The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V or 24V power supply.

44

It can support WS2812B and WS2813 but there is no option on the setting page. Please select WS2811 IC chip.when you control WS2812B and WS2813 LED strip. When connecting WS2813 or WS2815 LED strip, please connect Bi wire to GND port.

33

APP Control

5 5
1 Step 1 ~ Step 3

2 Step 4 ~ Step 5

22

1 2 5

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 1.38 x 3.15 x 0.67 inches; 2.82 ounces
Item model number ‏ : ‎ SP107E
Date First Available ‏ : ‎ September 17, 2018
Manufacturer ‏ : ‎ BTF-LIGHTING Technology CO.,Limited
ASIN ‏ : ‎ B07HFVW1G7
Country of Origin ‏ : ‎ China

AUX Input and Built-in microphone.The first mode is 3.5mm audio input.It can block out the outside world . The second mode is the built-in mic. It captured the sound of the outside world. The Sensitivity of two modes can be easily adjusted.If your LED light is 5V,please use 5V power supply.
Suit For led Strip and LED Matrix Panel .Compatible with many LED driver IC except the no IC chip led strip. It is also suitable for many DIY projects.You can set up number of segments and pixels number of each segment according to the LED pixels array of your lights. This feature is perfect for LED matrix. or other DIY project.
30+18+180 Kinds Of Lighting Effect .There are 30 kinds of music lighting effects for LED matrix panel ,18 kinds of music lighting effects for led strip .180 kinds of non-music lighting effects . Music mode and non-music mode can be arbitrarily changed. It can play lighting effect automatically. Control max 960 IC chips.
Supports RGB IC types and is compatible with almost every kind of one-wire or two-wire LED driver IC , such as FCOB RGB WS2811 IC，WS2812B,WS2811,WS2813,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix .
Adjustable . The speed , the brightness ,the number of pixels ,color order and the sensitivity are adjustable. When you connect SK6812-RGBW LED , the pure white channel can be adjusted individually.
LED Strip mode: Pixels/SEG max 150pixel.1 Year Warranty .Providing technical services .A 24-hour online hotline allows clients in the US write in with any question you might have.
Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.6 color sequences, RGB, RBG, BRG, BGR, GRB, GBR, select one of them for calibration
Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, the Bluetooth is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED.If you don’t know which power supply can be used for your LED project, you can email us
It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string is chasing rainbow effects .

$20.99

Compare


Price: $20.99
(as of Jan 10, 2025 03:03:29 UTC – Details)


Product Description

11

Product Parameter :

Name : BTF-LIGHTING SP107E Addressable LED Music Controller Working voltage: DC5V~24V (voltage depends on the led strip that you use) Max Control pixels: Control up to 960 Pixels Remote distance: 20 Meters Working temperature : -20℃~60℃ Product size: 85mm*45mm*22mm Package List : 1x SP107E music controller, 1x 3pin JST connector, 1x Female DC connector, 1x 1 to 2 Audio cable, 1x Mini screw driver . Support LED IC : Supports RGB IC types .Such as FCOB RGB WS2811 IC, WS2812B,WS2811,WS2813,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix . NOTE : The controller cannot regulate the output voltage at the VCC. That means the output voltage of your power supply must be the same as the work voltage of your led lights. If your lights need 5V input, please use a 5V power supply, never use 12V or 24V power supply.

44

It can support WS2812B and WS2813 but there is no option on the setting page. Please select WS2811 IC chip.when you control WS2812B and WS2813 LED strip. When connecting WS2813 or WS2815 LED strip, please connect Bi wire to GND port.

33

APP Control

5 5
1 Step 1 ~ Step 3

2 Step 4 ~ Step 5

22

1 2 5

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 1.38 x 3.15 x 0.67 inches; 2.82 ounces
Item model number ‏ : ‎ SP107E
Date First Available ‏ : ‎ September 17, 2018
Manufacturer ‏ : ‎ BTF-LIGHTING Technology CO.,Limited
ASIN ‏ : ‎ B07HFVW1G7
Country of Origin ‏ : ‎ China

AUX Input and Built-in microphone.The first mode is 3.5mm audio input.It can block out the outside world . The second mode is the built-in mic. It captured the sound of the outside world. The Sensitivity of two modes can be easily adjusted.If your LED light is 5V,please use 5V power supply.
Suit For led Strip and LED Matrix Panel .Compatible with many LED driver IC except the no IC chip led strip. It is also suitable for many DIY projects.You can set up number of segments and pixels number of each segment according to the LED pixels array of your lights. This feature is perfect for LED matrix. or other DIY project.
30+18+180 Kinds Of Lighting Effect .There are 30 kinds of music lighting effects for LED matrix panel ,18 kinds of music lighting effects for led strip .180 kinds of non-music lighting effects . Music mode and non-music mode can be arbitrarily changed. It can play lighting effect automatically. Control max 960 IC chips.
Supports RGB IC types and is compatible with almost every kind of one-wire or two-wire LED driver IC , such as FCOB RGB WS2811 IC，WS2812B,WS2811,WS2813,WS2815,SK6812RGB,SK6812-RGBW, APA102, WS2801,SK9822, LPD8806 etc strip light .WS2812B 8X8 ,8X32 ,16X16 ,22X22 LED matrix .
Adjustable . The speed , the brightness ,the number of pixels ,color order and the sensitivity are adjustable. When you connect SK6812-RGBW LED , the pure white channel can be adjusted individually.
LED Strip mode: Pixels/SEG max 150pixel.1 Year Warranty .Providing technical services .A 24-hour online hotline allows clients in the US write in with any question you might have.
Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.6 color sequences, RGB, RBG, BRG, BGR, GRB, GBR, select one of them for calibration
Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, the Bluetooth is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED.If you don’t know which power supply can be used for your LED project, you can email us
It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string is chasing rainbow effects .

Category: Tag:

Based on 11 reviews

0.0 overall
0
0
0
0
0

Add a review

  1. R&R –

    Works great as long as input voltage >5VDC
    I initially encountered issues with this controller, but all is well now! I am using the BTF-Lighting 5VDC 20A power supply which does not maintain 5VDC under the load of a 5m LED strip. When voltage drops to 4VDC this controller will not respond. (This is likely not be a concern when using 12VDC LED strips.) I was able to work around the low voltage issue by powering the controller from a separate power source — I happened to have a 6VDC power supply with correct polarity on the barrel connector. I disconnected the red LED strip wire from the controller VCC and connected the spare power leads from the same end of the strip to the power supply (white & green to the controller, white and red to the power supply).Using this controller with a SK6812 RGBW (natural white) LED strip, I am able to select any static color for the entire strip, including RGB white and natural white. There are also 200 light patterns from which to select the effect of chasing lights in multiple color options. The brightness and speed of the selected color or pattern can be adjusted. Under ‘settings’ you can specify the number of pixels you wish to have lit. I’ve seen it mentioned to always select 2048, but selecting more pixels than you have on the stip only causes the pattern speed to slow down.

    R&R –

  2. Brandon –

    Update: Defective Controller
    UPDATE:Seller contacted me to solve my issue. After providing details of power supplies being used and troubleshooting efforts already completed on my part, it was determined that I had a defective unit. The seller is sending me a replacement as well as some other items. Seller was very responsive and helpful in resolving my issue. Changed from 1-star for original product to 5-stars for responsiveness of seller.ORIGINAL:It does not power the entire strip. It only powers about half the lights. The other controller I bought at least powers them all. I am also unable to connect to the controller using the app. It never detects a SP105E device in Bluetooth like the picture indicates.

    Brandon –

  3. Matteo H. –

    Easy to Use but Poor Instructions
    4-Stars only because the instructions are not suitable.You will have to do some digging online and watch a few DIY videos if you are not familiar with this type product and are just beginning to dive in. I purchased this for a solar address light I rebuilt with a three-wire cob strip.In order to find the right configuration you will have to basically match the wires coming from your LED strip to the out ports on the controller.One thing that isn’t clear is that once you download and start your controller’s app, once connected to the device you will need to go into the app setup and select the correct type strip light from the built-in scroll menu.After tinkering with it I figured it out, works great but will have to return to update on durability, connectivity, and overall functionality over time as it is yet to be verified through use, and normal product wear. Overall product-wise rating as far as working is concerned for the time being: I say 5-star because it works!

    Matteo H. –

  4. TAKIx –

    Does the job really well!
    Once connected and configured, it works as it should. The app picks up the controller easily, and communication between the two is very responsive. Range is pretty good as well! Tons of preset modes for you to try and find what suits your liking. App setup is really simple. You set the pixels, RGB configuration, and LED strip type.

    TAKIx –

  5. Suncat2000 –

    Excellent value for the price
    I wasn’t expecting a lot from this controller so it exceeded my expectations. Great starter unit. Has about a dozen good light patterns in various color combinations plus several music settings. The mounting ears split when I screwed it down but otherwise was OK. It handled over 100 feet of WS2811 LEDs connected to a 300 watt power supply. Bluetooth connection is a bit finicky but Android app works fine. Not much control over lighting but for the price this little thing was impressive. I haven’t found anything with a better reputation without spending a lot more money. Better than “good enough”.

    Suncat2000 –

  6. Aricsdaddy –

    The is NOT a Spectrum Analyzer, just a poor light show on LED Panels.
    First thing to note is that this is NOT a Spectrum Analyzer as advertised, it is a light show only, pretty poor one at that if you are using panels.1. It says can do 960 pixels, well with panels it maxes out at 512 Pixels if using 2 x 8*32 (64 Segments total,) or 484 Pixels if using a single 11×44 panel.2. The SP107e has a stereo 3.5mm Jack, but only reads the right Channel, so it is missing half the music when it should have just mixed both channels into mono. When I tried a Stereo to Mono adapter, it would not recognize any audio at all.3. Frequency range of this is all over the place. On a panel it seems to go from about 50 Hz to about 4 KHz, and then bounce back in the opposite direction, then again and again; so you have 4 difference frequency layers displaying at the same time in the same area. (So on the left on mine it has 0hz and 10 KHz, and the Right side of the display, 10 and 20 KHz.) The SP107e should adjust the frequency table for the number of segments (Columns) that you enter in the configuration. The width of the frequency sweep on vertical pixels is allover the place too, unless you have the input volume very low, but then if you do music it is barely displayed.4. I have two units working in stereo, and both have different settings for the same-ish results (I cannot get them exactly the same), so manufacturing tolerances seem to be horrid. One unit has to have sensitivity set to off, and the other to about 5 percent to get the same input level through the 3.5mm Jack. The Microphones are not even close on both units. Also, both units seem to operate at different speeds, making one look slow and lame. Also depending on the input level, you will have random pixels light up even when no sound is being used. Every time I power up my unit, the Right display seems to have different input levels even though nothing has changed.The app uses slider scales for colors and brightness, so if using more than one unit (which you have to set up one at a time, it is very difficult to get the same result on both units.) Should have an option for RGB value, you know for the RGB LED’s.Finally, when setting these up with the 8×32 LED panels, it says they use 75 watts each which they can if run at blinding maximum brightness. Here, my two panels and two controllers are using less than 4 watts altogether, and that is in a bright room and behind speaker cloth.Oh and the app has no mirror mode either. So you would have to flip the display if you want to use two units in stereo.Finally I have contacted the author of the app but did not get a reply back to see if the controllers are firmware upgradable through BT. I am guessing not.The two videos will give you an idea of the issues with these panels. I have no idea why these videos are being compressed so much.** Update ** Since writing this review, I found that when first sold the SP107e was using a STM32F Arm CPU, and now they are using a much slower and less Capable GD32E230 Arm CPU which they did not mention. This is why the response time on my left panel is much faster. They do not tell anyone about this though. This is also why some configurations in the App are not allowed, because hardware divide on the new GD chip is much slower to implement. So when the new chip is only allowed 1250 ticks per pixel to calculate sound, color and all, and then is using 17 ticks per each divide compared to the STF chip which ran twice as fast and can do divide in as little as 2 ticks, it explains why the SP107e is, well not good.What companies will do to make more money without telling you.

    Aricsdaddy –

  7. Ignacio Aguirre Miranda –

    No funciona con adaptador de 5V ( no detecta tu celular el bluetooth ) tienes que ponerle uno de 12V y creo que dependiendo de la tira led le tienes que poner un adaptador de 5V a la pura tira led yo compre la WS2812B y le tuve que conectar un cargador de celular de 5V para que funcionara la tira led

    Ignacio Aguirre Miranda –

  8. 🦖🦕🧰🔧 Zak 🔧🧰🦕🦖 –

    Produit original qui permet de contrôler un éclairage LED via son smartphone. Le raccordement est ultra simple. Faire simplement attention à la puissance maximum de votre futur éclairage. pour l’utilisation il suffit je les ai le flashcode pour récupérer l’application et l’appareillage par bluetooth se fait sans problème.

    🦖🦕🧰🔧 Zak 🔧🧰🦕🦖 –

  9. Amazon Customer –

    Great service and support from BTF lighting.BTF went above and beyond to resolve an initial problem.A great product which works very well with my LED’s.Thank you. :o)

    Amazon Customer –

  10. Mesut –

    Mit der App sehr leicht zu bedienen sehr viele Funktionen und Leuchtmöglichkeiten

    Mesut –

  11. francois couppey –

    Facile à câbler, beaucoup de mode différents (200) mais se ressemblant par groupe de 10, seul les couleurs changes. A regretter, aucun mode ne permet de n’allumer qu’une seule led défilante à la fois. Adapté pour faire une guirlande ou de l’éclairage monochrome. Moins adapté pour une cinématique de mouvement. Fonctionne bien.

    francois couppey –

Related products