Lutron Diva LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs, Single-Pole or 3-Way, DVCL-153P-WH, White (2-Pack)

Effortless Installation, Flawless Performance
The Lutron Diva LED+ Dimmer Switch is a fantastic choice for controlling dimmable LED, halogen, and incandescent bulbs. Installation is a breeze, even for non-professionals, thanks to the well-written instruction manual. The 150W capacity and single-pole or 3-way compatibility offer flexibility for various lighting setups. Once installed, the dimmer works flawlessly, providing smooth and precise light control. I’m extremely satisfied with this product and highly recommend it.

Nice product, lost a star because of no instructions!
This was an easy switch to install once you know where everything goes. My main issue with this switch is that it didn’t come with instructions inside the box. They can be found online using a QR code they send with the switch, but that isn’t helpful when you are in the country with no cell service and the internet hasn’t been connected yet!

Love these, they dim down our LED lights very low
These are excellent quality dimmers. I had 2 installed in my new construction house that has no shortage of LED puck lights everywhere, burning out our corneas when they are on full blast. Dimmers were a must. Our electrician had easy work of installing these, they dim down very low which is exactly what we wanted. Will be ordering a few more eventually to for others rooms in our home.

Too many models of Lutron dimmers that look the same – this is likely the one you want
We just had our first child and during the course of setting up the baby’s room we realized we needed a way to reduce the light level in the room at night when changing diapers, etc… I bought this unit to match another I had in the house aesthetically. I like it because you operate it normally with the rocker switch, but then if you want to turn down the lighting level you can using the discreet slider. This seems to not put as much wear and tear on the dimmer slider as it infrequently is moved.It took quite a bit of research to figure out what all the different models of Lutron dimmers did. They have a lot of them that look identical, but with different characteristics operating wise. Even looking at Lutron’s site, not all the model numbers matched up with what Amazon sold.I eventually figured out that this would be the best dimmer for me as compared to my older one downstairs, this is a newer model that supports CFL/LED screw in type bulbs. It has one wattage rating for CFL/LED and a separate for incandescent (i.e. 150 watts for CFL/LED and 600 watts for normal incandescent/halogen). While I was using this on a halogen fixture today, I wanted the ability to swap to LED later so I went with this one over the older series.Note that this one does *not* have the convenient little night light that let’s you find the switch in the dark like the older series (that only does incandescent) does. I suspect this is because in order for that to work, it must “leak” some current through the “load” light bulb in order to light the nightlight, and CFL/LED ballasts don’t think that is very funny.Amazon also sells this same exact switch, but with an “H” on the end of the product SKU. From what I can tell, that just means you get the “retail” clamshell packaging and a faceplate cover with it instead of the small contractor style cardboard box. I hate packaging waste and I already had faceplate covers, so I went with this one.One other feature of note is that this unit has a little thumbwheel on the bottom left of the switch (behind the wall plate cover) that let’s you set the minimum dimming level. I suspect this is to keep CFL’s / LED’s from freaking out and flickering when they don’t get enough power to fire up the lamp and keep it lit. I am not sure if the older series had this or not. Since I am just using it with a halogen light right now I left it set to the default setting which works great and starts off at an extremely low light level.My wife loves me for buying and installing this thing, and I am happy with the quality.Highly recommended!-Eric

Good unit and like the ability to do a finer adjustment using the trim pot on the side. A lot of dimmers will not works for LEDs.

Lo acabo de instalar y debo decir que fue muy sencillo de hacerlo, tube que improvisar un poco con la caja electrica que tengo, pero